Is their a repair for a bad switch ? Motor only works intermitently,tested output of switch with motor connected. Depress switch motor inop. no voltage .Work switch (when motor works voltage present) ...
Finger Switch To get maximum drill rpms, the finger switch has to be held approximately half way on. If you pull on the switch to the stop, the drill also stops. ie; put pressure on the switch and the
Question about Channellock Drills
my trigger switch works sometimes and then other times the trigger switch doesn't work and my light goes dead. Do I need to replace the switch and if so can you buy them. FOR SOME REASON MY TRIGGER ...
speed control switch where can I get a new switch & how much will it cost You can find an Authorized Service Center near you on Hitachi's website (www.hitachipowertools.com) to see if they have a ...
start stop switch Problem with start/stop switch. Machine does not start or start occasionally. 1. Can you open up the drill? 2. If you can open up, check the area around the switch. Make sure nothing
Switch wiring Wiring the switch isn't to bad. When you get a new switch it should have the same color coded wires if not the new switch will come with the proper instructions.
The switch in my JCB cordless drill is starting to die. The rest of the drill is perfectly fine, motor etc. I have tried calling th JCB support number, however they were no help. Any ideas where I can
...It's either full speed or not at all. Can this be fixed? It can be fixed, you just need a new switch. I can not find a Dewalt model number DW056 so I'm not sure what switch you need. The DW053 ...
Same problem, switch has melted I've got the same problem, burned smell and all. Opened to find the switch and switch wires were melted. Apart from fixing the switch, which looks dang near impossible,
3 questions posted
Usually answered in minutes!
29 Questions
20 Questions
12 Questions