Drive systems Question what is the difference between the drive systems? SDS (or Slotted Drive System) bits for hammer drills/rotary hammers allow the bit to slide in the chuck and enhance the ...
I have a hitachi dh38ye hammer drill. Is their an adapter to change the spline to sds max?? sds plus to max adaptor....
Question about Dewalt Drills
...you apply pressure to the drill the bit stops spinning while the hammer action still works. Removed the SDS chuck and re-inserted it and it is the same issue. A worn gear could be or switch ...
drilling slowly have a dewalt drill that when you pull the trigger is turning slower than usual full revs. Not cutting out or stopping, just a constant slower speed If the battery is OK then the ...
wanted a sds chuck for my spline chuck I have a 11248evs drill and I am tring to locate a sds chuck. The adaptor you need to convert your slpine to SDS-plus is Bosch part# HA1020. Hope this helps. ...
Greasing - when & where? I have no manual for my dw999k (if anyone can upload one that would be great!) I can't work out where to apply grease to this drill. My previous drill had a chamber to fill up
remove broken drill bit soak the chuck area real good with W/D40 or similar,position drill so lube doe's not drain .let sit for awhile, then turn upside down and gently whack it about, worked 4 me,
...what carbide Masonry drill bits are available for the Hilti TE-6s and where I can buy them Any SDS Plus or SDS drill bit will fit. Available at Home Depot, SEARS. any SDS+ drill bits from 4mm To ...
Hammer function does not work on Bosch 11224vsr Drill function works hammer drill function does not Its usually a problem with the selector knob... depress the button fully and turn it passed the ...
...sds drill is leaving grease behind on my sds bits, it happened once I started using the chisel feature to channel along a wall, drill still works fine, just wondering what is causing the grease to ...
3 questions posted
Usually answered in minutes!
29 Questions
20 Questions
12 Questions