Makita 6349DWDE 18V 1/2" MXT Driver - Drill Kit "chuck keyless removal" Questions

Ad

...keyless chuck is My Dewalt 1/2" Drill (DW236) keyless chuck is broken!. I want to remove and replace the keyless chuck. I removed the "left hand" screw from inside the chuck. I can not ...

Ad

...keyless chuck on my Dewalt DWD215G? Open the chuck wide open. In the center is a retaining screw, they usually have left hand threads. Remove the screw. Take an allen wrench1/4" to 3/8" in size and ...

Ad

Question about Makita Drills

1 Answer

Chuck from my Mikida 9.6 volt keyless drill Dont know about a Makita, but my Craftsman drill , if you open the chuck all the way and look inside the hole where the bit goes, there;s a screw there that

...keyless chuck on a 12 volt makita drill remove keyless chuck There should be a Screw in side the end of the chuck were u put the drill bit in u will have to undo it back wards its got a left hand ...

Question about Makita Drills

1 Answer

...keyless chuck and the teeth have siezed open and the chuck is just spinning, then locking. if i could get some ideas of how to remove the chuck that would be great. Go to this LINK and find the ...

Question about Makita Drills

1 Answer

keyless chuck removal destroyed the KEyless chuck...unable to get chuck screw out...tried metric/ SAE allens, Torx, phillips Does it even have a chuck screw? Really hard for me to see down inside. Any

Question about Drills

1 Answer

...keyless chuck. if you have a keyless chuck then you do not need another tool you must turn the chuck counter clockwise to loosen the chuck and replace the bit. if you have a keyed chuck then you will ...

Question about Craftsman Drills

1 Answer

...keyless chuck How do I change a keyless chuck on my cordless drill? It's a craftsman 19.2 open jaws for large size bit.look in bottom and there will be a screw slot or phillips head screw or possibly ...

...keyless chuck The chuck is probably threaded on and should be removed in a counterclockwise direction. You could put the chuck Key in the chuck and hit it with a rubber mallet ,gently to loosen. Then ...

...keyless chuck from 18V DC759 Inside of chuck you have a screw, remove screw then tighten an big allen wrench into chuck, short side in, then hold drill and hit allen wrench with a hammer quickly, ...

Not finding what you are looking for?
Makita 6349DWDE 18V 1/2" MXT Driver - Drill Kit Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Makita Drills Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Makita Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...