Husqvarna "Chain Saw - 16" Bar, 3 Hp "stops running" Questions

...RUNNING AND STOPS AFTER ABOUT 15 TO 20 SECONDS. HAS NEW FUEL LINES NEW SPARK PLUG AND NEW GAS CAP, NOW IT WILL RUN WITH THE FULL CHOKE ON AND THEN IT JUST STOPS? suspect that the diaphragm is going ...

runs ok for about 5 hours then stops and y cant make it stars again until the next day that must be that new "take a friggin break" module. seriously, after 5 hours of run time, is that run for 5 ...

Stops running then will not restart need more info. It sounds like it does run or you would have stated it stopped working and will not work anymore. I need more info please. When it stops is it ...

...Starts then seems to run out of fuel. If I pump the throttle, it will run intermittently but stops immediately when I stop pumping the throttle. Will not run steady if I hold on the throttle. ...

Chainsaw will run but will not shut off with the run/stop switch My Chain Saw will run with no problems, but when I try to shut it off, it won't shut down with the Run/Stop switch. I have tried ...

36 cc craftsman 16 inch saw replaced fuel lines fires up but wont stay running it excellerates for about 15 seconds new filter as well b4 I changed the fuel lines it would run at an idle for 15 ...

Chain stops moving when placed onto wood Chainsaw engine runs normally, chain stops when placed onto wood surface. Lift it off and chain travels normally, stops at wood contact. Previously had problem

starts but stops after 2-3 seconds my mcculloch titanium starts and will only run for 2-3 seconds then stops,to start it again you have to give it choke but then it stops again,any ideas? sounds like ...

engine runs but chain is not turning. Take the side plate off of the saw and check the chain in that areaaround the clutch, there is probably something holding the clutch back.  Check the safety ...

Runs for short period then stops Will start then run poorly for very short period then stop. Choke dwill make it run very fast but it still stops. Hi abob