Husqvarna "Chain Saw - 16" Bar, 3 Hp "husky run wont" Questions

...husky prices, I know they are big cc, heavy wieght and big price. Every thing I dont want in a saw I can get a referbished homelite 16 inch 38 cc with anti-vibration handle for 78.00 & 7.00 ship ...

...wont!! What is the proper way to test the coil can you ome it out? Only had this a short while would really like to get it running. Is this you? ...

...2 things you might want to look at. 1) Vacuum test your fuel line. This is a common problem with huskys. 2) Check to see if the exhaust port or spark arrestor screen is plugged up. If so pick out

husky viprating on tick over and now wont start I think you are saying it sputters but won't run. Once it attempts to fire open the choke or it may flood. My 359 start: Cold: pull out choke control, ...

...wont start Ok, let's test it. We need 3 things for a motor to run. Fuel, spark and air/compression. This first test you always start with as it will eliminatethe need to test for spark and air. Spray ...

Husky Chain 18 in saw wont start after replacing fuel line The saw started after sitting for a few years. New gas was added it fire up & was running . Then quit on further inspection the fuel line

husky 372xp. started only made a few cuts then started to stall. could only keep running for few seconds at a high rpm . now wont start even with new spark plug. This could well be an ignition problem

...husky 61 used to run good but now it wont idle or if does i manage to get through a couple of limbs then it loses power and stops gets very hot quick the brake is not on Bailey's P&C ...

...run for long Get rid of all the old fuel Start afresh Strip out the carb noting which needle screw is which Make a slot in the screw head for a screwdriver adj. with a fine toothed hacksaw Lay the ...

Husky 51. Saw gets great spark. seems to be getting plenty of gas too. Fires out of the hole but when i tighten down the sparkplug it wont fire I have a husk 350, someone owed me money this is what i ...