Husqvarna "Chain Saw - 16" Bar, 3 Hp "chainsaw power full throttle" Questions

Ad

Question about Husqvarna Garden

1 Answer

...full throttle it startes to die. The saw will run fine up to 3/4 throttle but not full throttle. Spark plug if good shape and put freash gas and oil also the air filter is clean. Hi, bring the hi ...

Ad

...chainsaw at full trottle does not have full power. can you tell me what the compression ratio should be? you need to adjust the H screw on you carby, hold at full throttle, and turn screw til faster ...

Ad

Question about Ryobi Garden

1 Answer

chainsaw will start fine, but when I apply full throttle it seems to get bogged down a little and doesnt have full power. Then, as soon as I touch it to any wood it loses all power immediately, chokes

...chainsaw at full power when started my father-in-law said that he needed a new primer bulb installed and gave me the new one. while he was out i also had to replace some fuel supply line and fired it ...

...full throttle , lacks power knock in motor , compression feels fine it may all be in the carby settings if you do not have it adjusted correctly then it may be running too lean at full throttle and ...

...it loses power . i get some power at half throttle. it runs good on idle and when i press at full throttle. with out cutting anything Idle settings is not good maybe some crancase sealing is

...full throttle or under load saw starts and runs fine at idle. runs fine at half throttle under no load. dies quickly at full throttle or under load Your carb may be the issue but your ignition coil ...

...throttle any more stronger at beginning and mid throttle and loses power at full throttle Your air filter is clogged up with sawdust. Remove and clean it thoroughly and that should solve your

Question about Husqvarna Garden

1 Answer

...Chainsaw will start but then at full throttle bogs down and shuts off, at half throttle feathering the trigger at half throttle still wants to shut off then finally shuts off completley and will not ...

chainsaw dies at full throttle, idles fine and works with half throttle hi check the fuel filter,clean the gas tank,the carburator ,check the fuel pump(not to be tired).the fine filter inside the carb

Not finding what you are looking for?
Husqvarna "Chain Saw - 16" Bar, 3 Hp Logo

581 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...