Husqvarna "Chain Saw - 16" Bar, 3 Hp "chainsaw brand new carburetor" Questions

chainsaw model 3314 Is this unit under warranty? If so, take advantage. If it is out of warranty, did it work well up to this point? The carburetor is not pumping fuel, but running for a short time on

...chainsaw and i can't get the primer bulb to **** any gas, the bulb is in good condition however there is gas leaking out of the gas cap in the center of it, do I need a new gas cap and could this be ...

...new fuel into the carburetor. If this is ok, check the upper chamber diaphragm and valve components which are there to pump fuel into it. Go to: http://www.drystacked.com for a 12 page article on ...

new comparable quality saw? Check the fuel filter for plugging as well as the air cleaner and muffler. Check the fuel lines for hardness, cracking, or splitting--replace with original rubber line, not

brand new husqvarna 445, won't start From post by someone else: Did everything exactly as directed, tried a few times, including leaving alone for a while, nothing. I have the same problem with my ...

...new plug & fresh gas etc. Did you check for spark while the plug was out? It should be blue and snappy. If ok, place some fuel mix in the plug hole and try to start--if pops several times, then ...

chainsaw that had been sitting for over a year. It wouldnt rev and now it won't start. I noticed that the primer bulb isn't getting gas and now is stuck after priming. Machines don't have a fuel float

kill switch doesn't work, how do i fix it? The switch connects directly to the coil body of the ignition module. You may have to remove the left side cover to expose the ignition module. The switch, ...

...chainsaw start has spark its getting gas the compression is good the muffler is clean the air filter is clean its a brand new spark plug.. what do i do? First, pull a compression check, if you get ...

new plug. Check the fuel tank vent for plugging. Make sure the carburetor is securely fastened at all points. Be sure to use fresh fuel/oil mix (50:1) and shake the container thoroughly each time just