Husqvarna "Chain Saw - 16" Bar, 3 Hp "435 hard started" Questions

435.Hard to start.When it runs, it has no power.It does the same as if it runs out of gas.I loosen the gas tank plug, then it starts and I'm good for 10 minutes.I also have a Husqvarna 345.Runs like a

Hard to start Husqvarna 435 Yesterday I purchased the above model from a large home and garden store.......I could not get the thing to start. Took it back got a refund. Took another 435 from the ...

435 Husquavana is hard to start and when warm will not restart Try putting a spark tester on the plug. Run the saw and when it dies see if you can generate spark by pulling the cord, if not your coil ...

...435 husquvarna chain saw it is hard to start plus it idles high and it smokes and the chain keeps spinning when i let off the trigger i start it and it runs really high and it smokes and the chain ...

...435 Husky that had the same hard-to-start problem--warranty service replaced the carburetor and it seems to work ok now. The chain that continues to turn can be fixed by turning the idle-speed screw ...

Hard to Start Do you have good compression, good spark and is fuel getting into the cylinder.? More information is required

hard to pull start husqvarna 435 chain saw, is there a relief port plugged You may have to pull the spark plug to remove pressure in the combustible chamber for the first pull. Seek a professional.

435 Husqvarna chain saw not starting dumped gas and refilled not starting new last fall but now cannot start. any help with this. thank you misplaced manual and need to have advice please IT IS A HARD

435 (16 inch bar). Will it run well on gasolinw tih 10% ethanol? It had better do so--or any saw brand that fails to run on ethanol blended fuels will see sales fall rapidly in the USA. We, personally

...435.Having trouble starting.Do I squeeze trigger when starting? Is there a trigger lock for starting? Did you read the starting procedure in your OM? It is similar to this: Start Procedure Cold: ...