Husqvarna "Chain Saw - 16" Bar, 3 Hp "41" Questions

HUSQVARNA CYLINDER & PISTONS 575XP where can i buy them IPL for a 2009-04 pn 537 25 41-02 575XP (complete) here: HusqvarnaUSA.com http://www.husqvarna.com/us/homeowner/support/download-manuals/ ...

HUSQVARNA 41 CORRECT FUEL FILTER TO BIG FOR MY FUEL LINE IN TANK--DO I NEED TO GET BIGGER FUEL LINE?? Went to ace hardware store to get a fuel filter for a husqvarna 41 powersaw. according to all my ...

ignition coil where can i get an ignition coil for a husqvarna 41 air injection chainsaw made in 1997 Here you go. If the price seems high there are likely several more to be found on this page. Good ...

husqvarna model 41 i have two model 41's and neither will start both seem to have good compression even tried starting fluid both seem to have fairly good spark any suggestions Try changing the ...

i have husquavarna chain saw s/n 95212H01984 with sticker that says 41 Air Injection. Need to buy chain and/or chain bar. Need to know the model number for this serial number. Can you provide The saw ...

i have a husqvarna chainsaw 41(1994-05) is what the model number is showing the carb has been rebiult new gasgets it has fire but will not run can u help The 41 was quite prone to blowing the crank ...

chainsaw very hard to crank. too much compression,does it have a decompression valve? It's a model 41 husqvarna. There is no deco valve on this model, the later model ( 142 ) had a spring assist ...

...Call them during regular business hours tomorrow. Joe Thanks for choosing Fixya! The Husqvarna 36/41 did not change too much over its life time, so if it parts you need as long as they are taken ...

Starter cord will not pull Cord will not pull out to start the motor. It appears jammed. The pull cord or rope works on a tight spring just under the cover that the rope is in. Usually three to four ...

can I take piston and rings out of a 41 husqvarna and put it in. a husqvarna 350 chainsaw No. The 41 uses a 40 mm piston and the 350 uses a 44mm piston.