unable to locate adjustment control for chain oiler model 345 husqvarna chainsaw Not all 345 machines had an adjustable oiler, it is retro fittable if it does not, however if it hs an adjuster, the ...
Where is the bar oil adjusted from on husqvarna 345 My husqvarna 345 doesnt use enough bar oil I cant seem to find a adjuster on saw any where Turn the Hus 345 chain saw upside down, you may see a ...
Bar oil adjuster is located? Not all 345 machines had a adjustable oiler as standard, they were retro fittable, if it has an adjustable pump there will be a screw head under the crankcase below the ...
Question about John Deere Garden
how do I diagnose ignition problems on 345 with 20 horsepower Kawisaki no spark but cranks and has power to coil disconnect the ground wire from switch. if still no spark then your coil is no good. if
how do I adjust the oiler As standard the 345 did not have an adjustable pump, there was an option of an adjustable pump, if it has the on, then the adjuster is a three position screw comimg up from ...
Husky 345 chainsaw will only run with choke almost completely out. New air filter, spark plug, and fuel filter. Also replaced gas. turn both carb adj. screws out 1 1/2 turns from bottom and then fine ...
inslall piston ring install piston and sleeve Never twist the piston ring. Pull it straight apart. This will insure the ring will seat properly.
how do you take the head of the engine Depends on what model we are talking about, if it is a 340/345/350 you need to remove the fuel tank, the cylinder bolts are on the bottom of the crankcase, the ...
does Husqvarna 345 have decompression valve Very hard [lumpy] to turn over with starter cord Click here to see.Yes,it has one.
581 questions posted
Usually answered in minutes!
514 Questions
473 Questions
353 Questions
122 Questions
131 Questions