Toro Blowers Rake and Vac - Electric Blower/Vac - 51573 "snow choking" Questions

I have a CCR 3650 Snow Blower ,The engine is racing at idle. How do I adjust? As far as I remember this is a 2 stroke model. There is no idle adjustment. When you start the machine it runs at full ...

snow blower is running sluggish with the choke in the on position After the blower is started, I move the choke to the off position, but it cuts off and the only way it remains running is to move the ...

i have a mtd 3.5hp 21" snow blower it was bought new in 11/06 the problem im having is stalling it starts ok some times other times it stalls and won't run others it will only run at full choke ...

toro snow blower will only run on full choke Add fresh gas after checking the gas tank for debris in tank. Also drain the fuel bowl out, it may have water in it from condensation.

...it is running on CHOKE. the lever is loose and I have no idea how to replace or tighten it. Help! snow is coming! Hi, You will have remove the carburetor shroud and then check the linkages from the ...

Sears snow blower runs rough like the choke is on I have a sears 247 889571 24" snow blower. Start fine. Runs rough, like the choke is on. Choke is off. Fresh gas (ran it dry last spring). Ran 1 tank ...

...out of bottom of fuel bowl,it does work but i have to pull out choke 3/4 to have power to throw snow,can i buy a carb kit or can i rebuild it There is a "drain" valve on the bottom of the ...

small engines than I can remember. Especially ones that sit for an extended period of time ( like a snow blower). I also recommend add Stabil or Seafoam or any good quality fuel stabilizer to the fuel

I have a Craftsman Snow Thrower model # 247.881731. At the end of last year I drained the gas as recommended in the manual, this year I filled it with fresh gas and it now has a problem starting. I pu

I found a john deere trs 21 snow blower in my dad's garage and was wondering what direction is the open/closed choke position? The writing is all scratched off, so all I need to know is open right or ...