Poulan/Weed Eater No. Bvm200le 711482 24cc Gas Blower/Vac "coil gap blower" Questions

...coil assembly is bad. I need to know the air gap setting for replacing this part? Thanks Richard there is no set gap realy what i do is put a thin bit of carbord inbetween the coil and fly wheel so ...

coil air gap setting on stihl BG 85 C blower coil gap setting The box the coil came in should have a paper card for setting the gap. It isnt written on the paper....it is the paper! Put it between the

...textron moter for leaf blower? I assume you mean the gap between the magneto coil and the magnet on the flywheel. Usually you just adjust the gap to be as small as possible without them

...setting i just replaced the ignition coil on my BR-600 blower and i would like to know the proper gap setting between the coil and magneto look up the manual on the stihl site it tells you this ...

igition coil gap for craftsman model 536886621 ALL ignition coils are gapped at about .010 or ten thousand. Rule of thumb, normal business card inbetween flywheel and coil

...of the flywheel.? Tracking back the problem by having a new spark plug and coil would next point you to the flywheel. Coil to flywheel gap should be 0.25 feeler guage.Hope this proves useful.

...on the toro 20005 serial 250067677 you mean coil air gap ??? spark plug gap ??? should of included the engine numbers because that's not made by Toro !!! .011 is the coil gap .028 is the spark plug ...

...gap at the ignition coil/flywheel. It should be about .010"-.012" where the magnets in the flywheel pass under the coil legs. That is about the thickness of a regular business card. So, some ...

weak spark check the gap between flywheel and coil should be 010.gap.allso check magnet on flywheel.let me know what you find out.o if spark still weak change coil.let me know.ok

...gap be between the flywheel and the ignition magneta? CLOSE! put two pieces of paper against the Flywheel, then put the Coil in place loosely. rotate flywheel until magnets hold the coil to the ...