Poulan Featherlite Gas Blower, with Low Emission Engine, 150 M "leaf springs apart" Questions

...leaf blower. I have a problem with starter cord, It stuck all the way out and would not retract, took it apart and there are two springs, one to crank the engine and one to retract the cord, the ...

recoil was trying to crank and rope didn't go back in so we took apart and having a problem rewinding the spring. is there a trick to rewinding? YOU MAY NEED A NEW SPRING FOR THAT

...leaf blower will not run at full throttle. If I keep pumping the priming bulb it will throttle up to normal but when I stop pumping the priming bulb it barely runs. What is wrong and how do I fix it. ...

the pull cord will not rewind Sounds like the rewind spring has broken or the starting spool is broken or the piston is stuck. You will have to take the machine apart to see what it is that stops it ...

moby bladez pull cord spring out how do i assemble it i took it apart and can't put it back together The only trick to getting this back together is patience and determination. You must keep the ...

install recoil spring on RYOBI08420 Spring came apart when I went to install new rope Requires the removal of the engine/starter cover so you can rewind the spring as you will need to get it back in ...

I have no throttle control. found a spring disconnected. i don't know where it hooks to. how can i find where to reconnect it to? The spring will probably be intended to return the throttle to the ...

rope won't recoil. i can jiggle it back in. rope won't recoil. i can jiggle it back in. pulls all the way out and does not retract at all Clock spring either broken or un-hooked in inside of pull ...

I have a poulan weed eater and I have disasembled the whole thing down to the spring loaded peice in front and I cant figure out how to get the rest apart. I am trying to replace the pull cord. I have

...LEAF BLOWER? GOT APART BUT NEW ROPE WILL NOT RETURN TO REWIND. The pulley the rope goes onto needs to be fully wound against the spring. I usually wind the pulley and hold it with one hand while ...