starter rope will not retract pull the starter rope to start and the rope will not retract Either you have a broken rewind spring, or the starter mechanism is dirty to the point where the force of the
Starter pull rope will not not retract. how do i fix take off pull mechanism, take out rope and recoil spring, reinstall starter rope
stuck due to grease. One push with a screwdriver on the actual starter (The thing the rope turns) should wind the whole cord up. If not, clean it. Alot of oil/chunky-ness gets trapt when your using it
...starter rope out of the unit. How do I take the unit apart to re-wind the starter rope? Take the cover off and look under it, you should see a plastic round disc that the rope winds on, You will need ...
starting cord does not retract on my leaf blower (homelite) take off starter mechanism, replace coil, or recoil if undamaged. then replace starter rope
...this makes sense? There are starter pawls that catch the flywheel when the rope is pulled. They are plastic. You will need to disassemble the unit and remove the starter assembly to inspect the
...starter pull cord has pulled off. EASY,REMOVE TOP COVER OF ENGINE THAT HOUSES ROPE ASSY. LOOK UNDERNEATH PLASTIC PIECE,CUT THE KNOT OFF THAT COMES THROUGH HOLE AND PULL AND EXISTANT ROPE OUT. OK, GET ...
starter pull rope will not retract The recoil starter spring may need to be replaced or the starter pulley has become fused to the plastic housing. If it is not under warranty; taking to a shop to get
Starter rope will not retract sounds like the spring in the recoil starter broke. they usually break on the very end where they bend around connect. I have bent a new 'catch' on the end and got it to ...
...starter rope etc, are caused by the starter assembly being too tightly mounted to the motor assembly causing drag on the rope mechanism. I fixed the problem by adding spacer washers between the ...
258 questions posted
Usually answered in minutes!
778 Questions
175 Questions
129 Questions
92 Questions
66 Questions