how do you check starter push button Disconnect the wires that goes to the starter push button which there should be two and touch the two wires together for a little bit and if the starter kicks in ...
Question about Garden
Cannot push in clutch. When trying to start lawnmower, the clutch will not let you push it in. When you sit on the seat and try to push on the clutch, it will not allow you to push it. The pulley ...
Question about Garden
Can I use a steel push rod instead of the aluminium one in the intake? what maker of mower or tractor where exactly is this push rod being used or needed on your mower or tractor aluminum push rod has
24 hp engine. one bent push rod, second rod missing lost some power, no other problems This happened to me,the engine sat for some time and the valves were varnished with stale fuel,they stuck in the ...
craftsman lawn tractor my craftsman riding mower would not start and found out that the push rods on the intake and exhaust are bent and one fell into the motor. What could cause this and is ok to ...
5075e tractor stuck in neutral need help Confirm that the neutral tow/push lever in the back of the tractor is pushed it. This lever allows the tractor to be pushed. Hope this helps?
Question about Garden
i can't push my toro pony lawn tractor out of my shed is there a release lever for the ****** if not how can i make it possible to push i can't push my toro pony lawn tractor out of my ...
Question about Husqvarna Garden
I disengaged the rear axle to push the lawnmower out of the shed, now it will not re-enguage. Even with lever pushed in, the lawnmower can still be pushed as though it is not enguaged. make sure the ...
Question about Garden
...have a craftsman 917270781 riding lawnmower and when the lever in the rear is turned so that I can push it it does not move the lever is in the rear and if it is pushed in you should be able to
installing push rod How does the spring fit last time i check, i dont remember a spring connecting to a push rod. usually a push rod slides into the push rod galley until it hits the valve tappet.
44 questions posted
Usually answered in minutes!
529 Questions
514 Questions
473 Questions
353 Questions
122 Questions