Question about Cub Cadet Garden
...blade engagement is pulled the blades don't always engage. Several attempts and the blades will engage. Switch or the clutch? check the contacts most times the clutch contacts are loaded with grease ...
...blade to isolate the loud noise. Also, make sure the blades are not bent hitting the deck. I always balance my blades after sharpening as well. By isolating the bearings spinning them one at a time, ...
engaged, always. Narrowed it JD X320 blades stay engaged, always. Narrowed it down to the clutch, lower magnet won't hold clutch. Machine only has 150 hrs, Any ideas or help, the part alone is $150 Hi
My riding lawnmower blades will not disengage or engage Now my lawn mower will not start just replaced some pulleys on my craftsman 42 inch cut and now the blades are ingages all the time, but it will
Question about Garden
...always has. It has less than 60hrs on it. Could blades be still engaged and as safety mechanism not let motor turn on? Sounds like you still have PTO switch in the on position which would prevent the ...
Question about Garden
John Deere Roberine 1902, only 1 set of blades out of the 5 will engage. intermittenly this problem occurs. Having cleared the debris around the blades only one set of blades will turn and it is ...
Question about Garden
...the blades are not engaged so the "always spinning" Engine "pulley" wont burn through the belt ( you hear it squeal when you engage blades) That is the pulley and belt suddenly greeting each
...always put the V side of belt (inside of belt) into the pulleys and put the flat side of belt (outside of belt) up against the idler pulley (the one that moves to make belt tight to engage blades) ...
Blade always engaged making mower more difficult to start. I accidentally removed all 3 bolts when changing out the blade. The center bolt appears to be part a blade holder/clutchnot sure if that is ...
229 questions posted
Usually answered in minutes!
68 Questions
23 Questions