...pump. Check valve positions. Clean filters...may need to replace cartridges in cartridge filter, or take out D.E. grid assembly and clean it on a D.E. filter, or change sand in a sand filter... low ...
Question about Hayward Pool & Spa
...pump pressure is about 9lbs i cleaned the de filters they seem fine i have good flow out of my jets when i hook up the pool cleaner the pressure drops to almost nothing. can my impeller be clogged? ...
...filter doesn't register any pressure. Try priming the pump by filling the hair/lint pot with water and starting it up. If the pump pot is full while it's running and you still have no pressure, you ...
Question about Hayward Pool & Spa
...filter is clogging up. If pressure decreases on the filters pressure gauge, then the basket, or literally anything that is decreasing or stopping the water from getting to the pump, or more precisely ...
...pump running when checking pressure? Second be sure "filter" is selected on multi-port valve. Third, remove gauge with pump off and test gauge with compressed air and be sure gauge is working (don't ...
...pump should operate at. Instead it will vary based upon the hydraulic load of the system and it's components. A range common to AG pumps/filters is between 10 and 16. As the filter gets dirty it ...
...pump for the filter - Clogged filter / dirty filter restricting flow and building pressure - Hose(s) too small a diameter - Restrictions in or blackage of a return line - Hoses connected to ...
...pressure for the filter outlet. pulls water in great, backwashing pressure is good, vac.is good pressure. when i move to filter, it shoots over then O pressure and barely trickles out. it sounds like ...
...pump strainer basket and filter pressure. If filter pressure builds. time to backwash the filter. Also, the impellar on the pump might have debris in it... I have a high rate sand filter.Model ...
17 questions posted
Usually answered in minutes!
1,045 Questions
287 Questions
93 Questions
43 Questions
29 Questions