My plunger valve for the outflow hose broke. What can I do until I can get another one Just remove the plunger assembly and hook the hose directly to the nut on the outside of the pool wall.
PLUNGER VALVE IS STUCK AND I CANNOT GET IT TO COME UP... THIS HAPPENED QUITE OFTEN LAST YEAR TOO AND IS VERY FRUSTRATING. CAN YOU HELP? I am having the same problem and I would like to find out how to
...it ? YOU CAN THEY ARE REMOVABLE IF YOU CAN ACCESS YOU MAY BE ABLE TO MOVE BY PULLING UP ON CENTER PLUNGER WHERE HANDLE ATTATCHES AND PUTTING IN TO FILTER ...
...POOL WHEN HAVING THE SAME TROUBLE IT HAD BLOCKAGE BETWEEN THE 1 1/4 HOSE ADAPTER ON THE INLET SIDE OF THE CONNECTION SUPPLYING THE PUMP AND THE BLUE FILTER SCREEN BEFORE THE OUTLET VALVE. MIGHT BE ...
...pool, get rid of the plunger valves. They restrict the flow by about 1000GPH or more. There is a plastic grate in the inlet side of the pump. I just took a small file and sharpened the leading and ...
...could it be? CHECK FOR A BLOCKAGE IN BETWEEN THE OUTLET AND THE PUMP MAY HAVE HAIR OR TRASH SIDE OF THE PUMP AS THERE IS A BUILT IN STRAINER THERE. ALSO CHECK YOUR PLUNGER VALVE AND SEE IF ITS
Plunger Valve there was a black rubber seal where you tighten the value to the pool. It was collapsing inside the valve each time i turned on my pump. I swapped my cut off valves (low to high and high
...valve appears to be partially stuck in the open position. I had a similiar problem. I took the sweep motor apart and used a scotch brite pad and smooted the inside of the piston that operates the ...
28 questions posted
Usually answered in minutes!
1,045 Questions
287 Questions
93 Questions
43 Questions
29 Questions