Question about Husqvarna Garden
...chain saw it is hard to start plus it idles high and it smokes and the chain keeps spinning when i let off the trigger i start it and it runs really high and it smokes and the chain spins rapidly if ...
...saw chain locked up. I took the cover off and cleaned the saw dust etc. Cranked and almost immediately the chain stopped again. Saw smoke coming from clutch area, but saw was not overused and the ...
Question about Stihl Garden
...saw runs but chain doesn't turn and it starts t smoke, is the clutch bad ? how do I know if the clutch is bad on my saw. I have a Stihl ms 391 and it runs but chain doesn't turn and it will smoke if ...
...is smoking logs are getting hot and smoking as i am cutting this is usually from a dull chain Sharpen the chain!!! Perhaps turn it around so the sharpened area meets the log when the chain turns. ...
chain smoking while cutting,hard cutting,and pull string hard to pull new saw. too much oil in the fuel, or set screws are not mixing air fuel properly. have the set screws looked at, and listen for a
Question about Husqvarna Garden
chain for the saw...reason i ask about the chain comming off the saw is that when it does the driver have a tendency to become nicked and will heat up the clutch because the saw is trying to drive the
...chain. Start the saw, does it still smoke? Yes post back below, no reassemble your saw, ensure the brake is open. Start teh saw. Smoke? If yes post back below. ...
...chain saw, motor smoked, stopped running. Worth fixing? Hi, Till you get the motor and get the new motor insatlled you will have more into it then a new one... heatman101 have a wen 5016 electric ...
...smoking excessively when in use I put on a new chain, filled the bar oil etc.. after just a few minutes of use, lots and lots of white smoke come from the saw and cut area. cutting is also very poor ...
...chain saw blows smoke out the exhaust. New ring ??? A friend of mine ask me to look at this for him. Craftsman chain saw. I made some adjustments on the "High,Low,Idle" screws. Saw ran ...
546 questions posted
Usually answered in minutes!
583 Questions
457 Questions
255 Questions