Poulan Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin "chainsaw pull start smooth" Questions

...turning on chainsaw. The pull cord gets stuck and will not pull smoothly. Whats the problem? if it runs ok after you get it started it could be the starter pulley. the blue max saws have that ...

chainsaw Model 8901/8902 and I am having difficulty pulling cord. It seems to lock. What could be the problem? I tried adjusting chain so that it turns freely by using a screw driver. I made sure that

start. Pull recoil rope will not pull out smoothly. I took the spark plug out and the recoil rope pulls smoothly the way it should. I would suspect possibly you have the incorrect spark plug installed

...pull cord to start has good compression and spark check a couple of things... pull the muffler off and look at the piston... if it's not smooth then bummer check the ignition coil area and the recoil ...

...start it jerks won't pull smoothe compression is excessive. check for flooding allowing fuel to get to the combustion chamber, correct plug length and carbon build up from incorrect oil/fuel ratio in ...

...start the lawnmower some time the pull snaps back at me really hard, other times the pull of the rope can be smooth. Is ther some adjustment I can make to make opulling the rope smooth and ...

start the pull rope will only turn over one turn and stop. i removed the spark plug and pulled it 5 times every thing turns smooth put the plug back in ,and it is hard to pull Check the starter pulley

...Turn the jets all the way in then turn them out 11/4 turns.then start it and adjust the low speed jet until it idles properly.then pull the trigger for full throttle and adjust until runs

...pull to start saw it is hard to pull and feels like the piston is jaming or to much compression. when i pull the spark plug out the pull is easy and smooth and the piston moves easily. no visable ...

...start it will not pull through evenly the term 'kick back' shouldn't be used to describe your problem. Kick back is a dangerous occurrence when the front top 90 degrees of the bar tip hit a static ...