Question about Poulan Garden
...chain saw starts but won't move the chain, and shuts off when My chain saw starts but shuts off when I press the trigger to move chain; Make sure the chain brake is not engaged.Pull it toward the ...
chain saw emitted sparks and now does not start. chain saw has only been used for about 10 hours before it died. chain saw worked on saturday...new unleaded gas was used and used the correct gas/oil ...
...saw should take off running , chain wont move ,walk to wood pile then disengage the chain brake and cut wood , if saw fails to start after this procedure then there must be a fault in saw , consult a ...
Question about Husqvarna Garden
chain saw won't stay on and now won't start Small husqvarna chain saw...started and then cut out...drained and replaced gas/oil and replaced spark plug. Now it won't start at all don't know what to do
...CHAIN SAW MODEL 1420 ''Chain came off track How can I put the chain back on track? Chain is probably stretched. SAFETY FIRST. Electric saw, make sure power is unplugged. Gas saw, make sure sparkplug ...
the saw. It should move a bit ant you may hear a click. The chain should now move. If the chain moves easily when the saw is not running, but doesn't move when you rev the saw up, the clutch is broken
...chain brake disengaged. The saw I used first (Pioneer 1980±) has no chain brake. I now have a Mac 110 (top handle) that is very awkward to start on the ground. I engage the brake on it before I ...
chain saw wont start after running out of gas? my chain saw will not start after it ran out of gas, why is it doing that? Hi Fill the gas tank with new fuel.Priming the engine(put some gas in the ...
Question about Garden
...saw, if the chain is sharpened with an aggressive angle, the little pads start slipping are wear quickly. If you have the chain tension tightened too much, it will bind in the guidebar and stop the ...
...start? Most electric saws will have a saftey cut out micro switch for the chain brake, pull the hand guard fully back toward the rear of the saw to make sure the brake is completly off, now try
546 questions posted
Usually answered in minutes!
583 Questions
457 Questions
255 Questions