Poulan PP4218AV 18" Chain Saw "won start" Questions

...won't start. Replaced carburetor, fuel lines, fuel filter, ignition module, spark plug. Using new gas and oil. Has good spark but won't pop. Chainsaw won't start. Replaced carburetor, ...

...won't start. If you put gas in carb it will start but won't keep running. Replace the fuel filter in the tank, check the fuel hose up to the carb for signs of leaking, if so replace the line, ...

...start, won't continue to poulan 446t Will start, won't continue to run. I emptied out gas and found it was old gas. I cleaned carburator, soaked it. Changed spark plug any suggestions? The ...

...won't start. Was running fine and has never had a problem starting (owned since new, 14+ years). Chain slipped off. Fixed and then saw wouldn't start. Good bright spark & fuel. Also, ...

Won't start. Plug is firing. Primer bulb gets full. Still won't start. These machines have had issues with main bearing cages breaking up, this it turn scores the piston and snags the ring in,

...won't start. I took out spark plug, put in some fuel and if fired right up. But won't run. homelite xl chainsaw won't start. I took out spark plug, put in some fuel and if fired right ...

...won't start. The pull chord won't pull out. Even a little. It was out at one time, in the loop on the mower handle, but I had to let it go into the motor and now it won't come out. You ...

#39;t run without full choke on and gas trigger wide open, won't idle without dieing? Fuel starvation, start by replacing the fuel filter in the tank, check the fuel hoses for leaks up to the carb

My Ryobi 4545 Chainsaw started but would not tick over. Now won't start at all. Check your anti kick back bar across the top. If you bumped it forward will not start.

fuel filter, spark plug, coil....it has spark and is getting fuel, it just won't start Try bypassing the switch by connecting the two wires together. If it starts then you know what the problem is