Husqvarna Forest & Garden No.967012396 345 16" Gas Chain Saw "chain oil adjuster screw" Questions

Ad

Question about Garden

1 Answer

...chain oil thank. started sarted saw ,chain still not oiling. Without knowing what saw you have it is hard to exact directions.On most saws their is an adjusting screw on the bottom side of saw by oil ...

Ad

Question about McCulloch Garden

2 Answers

...oil flow for chain oiling. At the end of the oil pump you will find the adjust screw. Turn screw clockwise to decrease oil flow or counterclockwise to increase oil flow. Hope this helps. All the best ...

Ad

chain bar oil. PM145-14 32 cc mod 600032-54 serial 11-022763 Remove the bar and chain after releasing the chain brake. Clean the engine case where the bar fits next to and start the engine--oil should

Question about Garden

1 Answer

chain oil flowing out afterr replacing chain adjustment screw and bolt Remove the bar and chain completely. Clean the entire case side where the bar fits as well as the bar drive end oil ...

Question about Echo Garden

1 Answer

chain oil when not in use two things come to mind. 1. The oil adjustment screw on the bottom of the saw is set too high for the type of cutting you're doing. 2.If the oil setting is too high, your saw

...chain--look at the oil port where the bar mounts next to the engine. It should ooze out oil with the engine running fast. If nothing at all, the pump, oil lines, and oil filter in the tank should be ...

Question about Husqvarna Garden

1 Answer

chain oiler i own a 272xp, does it have an adjustable oiler or is it fixed? Depends on the vintage, turn the saw upside down and you can see a screw to turn, 3 settings, right under the clutch and ...

...chain very well and the adjuster is fully screwed down full?? the oil drips out slowly but not enough! Are you sure the oil adjuster is supposed to be screwed CW all the way for more oil? Most saws ...

working. Make sure the holes on the bar are clean also. running the saw at a fast idle for 1 min should oil the chain well enouth that it starts spraying off the end of the bar when you gun the engine

...hole maybe full of dust & oil. Rotate the screw while holding the chain next to the tip of the bar to determine clockwise or counterclockwise. When adjusting the chain tension don't over

Not finding what you are looking for?
Husqvarna Forest & Garden No.967012396 345 16" Gas Chain Saw Logo

78 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...