chainsaw A link to an OM for a 2005 Husqvarna 357XP/359 follows (may not be your saw): http://weborder.husqvarna.com/order_static/doc/HOUS/HOUS2005/HOUS2005_1150046-95.pdf The procedure is on page 35.
chainsaw. The replacment for the Husqvarna 357xp is the 560xp, it is only available in the US at the moment, we will see it later this year, has anybdy any experience with it yey, good or bad YEs, Its
357xp 359 After 15 to 30 min. of cutting engine gets extremly hot and cuts off. Checked spark plug,air filter, and made sure all cooling system components are cleaned. I was told it may be the ...
chain oiler 357xp oiler on 357XP not working had gear replaced last season? when you say that you changed the gear,was that the plastic one?check the other gear that is on the pump itself.make sure ...
How do you remove the clutch from a model 359 chainsaw? There is a special tool available, or you can insert a flat blade screw driver into one of the slots in the clutch centre ( they are designed ...
357xp piston and cylinder damage I would recommend changing the cylinder, piston, rings and bearings as a kit.
rear engine mount damage 357xp engine damage http://www.mediafire.com/download/kntvh8rmtlu14a5
...season of use. Has been trouble free up to this point. I work for warcks county council, the husky 357xp is our main saw. We've experienced the same problem with many of our new 357's. after many ...
engine cuts out My Husqvana 357xp starts ok but cuts out afer 30 seconds or so whether idling or revving . You probably have a fuel line that is cracked or has a hole in it of some sort. You should be
...357XP chainsaw leaks oil all over as soon as I fill the tank. Any solution? Never leaked until now. You need to find out where its coming from, drain the oil tank and re fill with some fuel, as this ...
78 questions posted
Usually answered in minutes!
529 Questions
514 Questions
473 Questions
353 Questions
122 Questions