My Troybilt pressure Washer Model 020207. runs forabout 30 seconds then the motor stops. Acts like motor is locked up. Motor can't be pulled until water hose is disconnected. Took the water pump off ...
Electric Pressure Washer I have a minimally used pressure washer rated at 1750 psi and electric.AFter plugging in the supply hose and power, I turn the unit on and it starts for a second to pressurize
Not enough pressure I Have a Craftsman Pressure Washer Model 127-676400 /1400psi. It runs Continually with low pressure.I cleaned the filter and have lots of pressure at the source. Whats my problem. ...
keeps shutting off after a minute had problem before and I think it was problem with 'heat sensor'. Sound familiar? What is correct part name? if it keeps shutting down that is what the problem is you
...replaced the wand but that didn't solve the problem. replacing the wand wont solve the pressure problems, its going to be the pump problems, pump create high pressure to the wand. hope that ...
Karcher Power Washer Problem We have a Karcher Power Washer - Gas Unit - M # HD3101DR Unit will not build up pressure to hose. 1- Clean all filters 2- Clean parts 3- Trying to find the Bypass for this
XR2600 unloader valve problem, I believe. Can't XR2600 unloader valve problem, I believe. Can't locate it on the pump however to fix it or lube it? It's the brass piece that sticks through a ...
karcher gun leaking The gun on my Karcher 520M leaks but only when the trigger is pressed, even after I replaced the o ring (PINK IN COLOUR!) on the metal part of the hose that enters the gun. I have ...
...OK. Check your "Points" also check, your magneto too... Ensure you have a good healthy spark. many problems are caused by bad electrics,and mistaken for all sorts of problems, this all needs to be ...
113 questions posted
Usually answered in minutes!
56 Questions
50 Questions