...is stuck. chuck wont open. turns but makes a bit is stuck. chuck wont open. turns but makes a clicking noise the chuck is broken inside if clicking. Ace and True Value stores sell chuck ...
There is a bit stuck in it and it wont even budge . I think the chuck is pooched but the drill is hardly used . Does anyone have any ideas how to fix this ? Use a pipe wrench to turn the chuck open. J
in a vice . you will need to squeeze it very tight. then put the drill in reverse and pull the trigger.if i wont come off you will need to hit the chuck with a hammer while you are holding the trigger
...wont come off you will need to hit the chuck with a hammer while you are holding the trigger. if you have a bit stuck in the chuck and cant get it out put the chuck in the vice and hit it very hard ...
...chuck screw wont loosen cant move screw turning clockwise but wont budge The chuck screw on drills is put in with lok-tite and is reverse threaded. You need to get the screwdriver on it firmly ...
can't get the chuck to turn have you got the gear switch all the way over? if its only half way across it wont move at all, the forwards and revers gear switch is by the triger
wont drive My Craftsman hammer drill broke when drilling recently. The motor runs like normal, but the chuck will not turn. Anything I can do? It sounds like the gear inside sheared the teeth. You can
Question about Drills
heavy duty drill press runs and spins the back pulley but the front pulley does not turn. The chuck wont spin. I cant even turn it by hand. Get on it with wd-40 or liquid wrench and a real pipe wrench
...chuck wont tighten when i place the piece inside the chuck i try to turn it but it wont! Sometimes the chucks jam when opened all the way. A firm hand and a quick **** of the chuck sleve will release ...
8 questions posted
Usually answered in minutes!
104 Questions
75 Questions
18 Questions