Craftsman Single Speed Rotary Tool "disassemble" Questions

...auto parts store and get a new piece of tubing and glue it the same way.you will have to partially disassemble it to replace the coupling. if you disassemble it the collet just lays in the housing

plastic drive sleeve Go to Dremel.com and you can buy a replacement from them and they also have a toll free tech line that you can call for assistance in the disassembly and reassembly of the tool.

my dw071 spins but will not light up The laser diode can be dead or one of the very thin wires on the laserdiodeunit can be broken Because of the callibration of the laser and more small underlying ...

...the motor and collet.i use rubber tubing and hot glue to keep it working. bad news is you have to disassemble it to install a new

Hi, Recently purchased a factory rebuilt 11255vsr and have put it to hard use. I'm noticing oil on the bit shanks, high heat @ front end, louder and louder noise. Nothing critical yet, but I hear ...

...do then is go to Dewaltservicenet.com and download a schematic for the tool and you can see how to disassemble the locking mechanism to get to the collet nut. Let me know if you need help before ...

...use the strain relief (that's a rubber boot or coiled spring in the area of the failure). Carefully disassemble the dremel - taking pictures as you go. I assume you can solder. good luck, Al ...

...vise or with vise-grips (you will probably ruin it) to hold it while you loosen the collet. You can disassemble the tool and get the lock assembly P/N 2615297356 from for less than $2.00. Search for ...

i have a rotary tool single speed chuck does not i have a rotary tool single speed chuck does not spin Common issue with these, the plastic flex coupling is broken- Replacement available for $2.57 ...

...the page and on the left hand side there is a link to view the parts list and to show you how to disassemble this. If you need more assistance please let me