Hitachi H45FRV Round Hex Demolition Hammer "wiring" Questions

the wire jams in the hose. it is feeding properly but the wire gets hung up a foot or 2 before the nozzle. Had one do the same thing and ended up installing a Teflon liner,liner worked great and had ...

I got a Kango 900 I need to buy brushes I got a Kango 900 jackhammer stopes working i took the brush cover off and found the brush wire came off and the earth wire came off to so I need a complete set

i have a hitachi demolition hammer h65 1 1/8 and the cord came out of the switch and it has 2 numbers 1 and 2 can you tell me in which number, the black wire go? It shouldn't matter.

makita wire come out Hi deanDo you mean  a Mkaita 1304b? Is it just the main cable that has come out? in which case you can undo half of the handle and reconnect it to the switch.

kango 900 manual Motor worked, then stopped. Could it be brushes or what? Could be brushes, switch or wiring. Use a meter to see.

The hammer suddenly stopped and wont restart. No warning, no motor fluctuation. Is it likely to need new bushes? Had only been using it on floor tiles for less than 2 minutes. Now nothing. Depress the

someone has taken apart my chipping hammer and removed all the wires . im trying to find a wiring diagram or schematic You can try entering the nameplate data here ...

I am exploring the idea to install wire mesh on my exposed block exterior basement. What material (product/products) do I use for a base (scratch) coat and then for a finish? Also, can I paint it ...

have a problem with bosch brute jackhammer, quit working while using it, replaced switch, still nothing, anyone that can help? did you check the cord first? after that I would check the brushes and ...

Proper wiring for handle&trigger You can find it here---> eReplacemntParts. Please post back!