Stanley Bostitch 18 Gauge Brad Nailer 1 - 1/4IN - BT125K - 2 "driver" Questions

gage is set all the wat back a air on compressor is set to 90 psi Mis-fire usually happens when the driver does not return to the top of the cylinder. With the driver only partially up, the first nail

New Hitachi NR83A2 with jambed nails. Removing jambed driver can be very difficult. I use an old hitachi driver with some metal removed at the tip to drive in the jambed piston. I grind the used ...

...appreciated. Thank you Usually, a poping sound within the nailer is indication that the driver piston is stuck in place. The "pop" is air pressure entering the cylinder, however cant move ...

My nail gun hitachi nr83a2 only fires a nail half way I just bought a new driver because my old driver broke "note that the new driver i bought was for a NR83A". I believe it has to do with the bumper

...does not fix problem then check or replace orings on the feed piston (3 orings) , replace the driver oring and make sure that the driver sheet seal is not broken. The sheet is located at the ...

driver will not retract after firing Generally caused by three issues. Bent driver, worn or cracked lower bumper or worn piston ring. Remove nails and tilt nose of gun up then down; the driver should ...

Where can I find a driver blade guide and driver blade seal for a Hilti RN312 framing nail gun? I have located a "bumper/piston stop" and an o-ring rebuild kit, but I need the driver blade ...

driver blade not returning to top dead center driver blade will not return to top dead center to let next nail to adfance Several things to check. Piston ring /oring should not be too tight or too ...

...guns. Usually, when you only hear a puff of air coming from the trigger area or within gun, the driver or headvalve is stuck. Usually easy to fix. First check the driver by removing air supply

the nail gun is sticking ever shot and will not reset Driver not returning to top of cylinder is caused by several issues. Bent driver, piston oring, and check valve. Remove head and pull out driver. ...