Question about Stanley Tools & Hardware - Others
floor nailer from a friend. The first strike was so smooth that I assumed that the nail had not been driven in, the second strike left me with a broken part resulting from one nail being driven into a
Question about Stanley Tools & Hardware - Others
...3 metric allen head screws.The one that comes on the tool from the factory is the one for the 3/4" flooring. Here is a link to the parts diagram with the part numbers. ...
...floor nailer is stuck with cylinder in the down position. Brand new refurbished, about 50 2" cleats driven without a problem, then some sort of misfire resulting in the stuck cylinder. It drove ...
Question about Hitachi Tools & Hardware - Others
...floor nailer the nail driver is broken where can i get this part denis monette [email protected] for a NR83A2 driver assy you need part #877323. go to toolspartsdirect.com and they have what you ...
floor as borrowed nailer from a friend who needs it back for his business <sigh> You may try to see if the plunger is in a down position, if so you may be able to take a screw dirver or punch of
Question about Stanley Tools & Hardware - Others
...nailer as well, and the cleats wouldn't work either. Tried both 1 1/2" and 2" staples and cleats. We're installing 3/4 inch oak ontop of 3/8 inch plywood over original tonge and groove plank (~1"). ...
...floor stapler is not driving staples. I partially drove one staple with a glancing blow then drove another on top. I cleared the jam and now it will not feed staples; It fires "blanks". ...
Question about Stanley Tools & Hardware - Others
a little metal piece with a phillips screw in the center that guides the staples out of the magazine broke, what is the name of the part or part number I can't see exactly what you are looking for so ...
floor air nailer is jammed and there is no my floor air nail gun is jammed and there is no nail stuck in Hello. Sometimes putting a few squirts of a penetrating lubricant such as WD-40 into the firing
i have a bostich m3 airnailer for hardwood floors and i dont know how to load it, i put the nails in, i smack the firing mechanisim it appears to go off but i pul it away and theres no nail? what am i
87 questions posted
Usually answered in minutes!
68 Questions
48 Questions
33 Questions
58 Questions