Craftsman 1 Hp, 4 Gal. Air Compressor "build 50 psi" Questions

...up pressure ( down to 25 psi ) . I replaced the piston and sleeve. ( the ring was worn out ) Now it will only build up 50 psi and keeps running - any ideas ? Clean or replace your check

build to 90 PSI It stops at 50 PSI not enough to use the Impact tool There should be a pressure regulator with a gauge hooked to it. They usually have a knob that you turn to the right to increase the

...build the pressure up to 50 than shuts off than repeats it self the inline keeps pressure steady even if tanks are at 200 psi The spray gun consumes more air volume than the compressor can deliver. ...

...builds to around 50 psi. Then unplug machine from power outlet. Listen for air leaking out of tank. In bad cases, air will actually leak out of intake filter. Replace check valve as needed. Good ...

...50 psi My PRO-SOURCE ''made in China'' 2HP-13 Gal air compressor will not go up to 90 to 100psi like it used to. It now does not go over 50 psi, and does not shut off, and gets hot. I have tried ...

...build up pressure beyond 50 psi.yes I did check the drain valve and no leaks. Motor seems to be putting out the rpm's and the oil level is fine. Need help!!! Check for a leak between you compressor ...

build only 50 psi and dont shut off or reach 100psi If this is a no oil unit, more likely your piston and sleeve are damaged and need to be replaced. thy are not that hard to do. when you get your new

...50 psi. But no more. The compressor continuously runs never shutting off. I can hear no leaks. Also the on/off switch runs in the off position. You have to unplug to kill motor. I guessing maybe this ...

...50 psi then will not build any higher the air is being drawn in on one cylinder intake and the other is venting air.Does this mean the heads are shot or is it the valve plate and how hard is it to ...

50 psi then blows the breaker took the air cleaner off and checked for obstructions none found .if i put my finger on the air inlet and restrict the intake by half it will build to 125 psi and cut out