Craftsman 3 gal. Air Compressor, 1.5 hp, Horizontal k "twin cylinder" Questions

How do i remove the crankshaft from the compressor side of the d55250? I removed the bolt but the crank doesn't come off. Do i need a puller? If so, which one? The ones i have aren't working. Should ...

...twin tank 2hp comp will run but pressure wont build up pass 20 lbs. If the motor is working OK but pressure won't go over 20psi you may have an air leak but most probably have damaged piston ...

...twin cylinder air comp. >20years old. Ex service stn. Shed just rewired 3ph. Is rotation critical? No markings to be found. rotation is critical as the big end bearings of the compressor are splash ...

...twin v. the motor runs and it is pumping air but it will not build any pressure. The compressor should pump into a final check valve where the pressure switch is located. Check the condition of that ...

...twin tank framing air compressor and it will not pressurize past 65 to 80 psi, so it never shuts off... even when I turn the pressure "out" valve way down to below what should be 65 psi nothing ...

Twin cylinder, single stage. What kind of oil do I use ? Thank you! Compressor oil is less demanding then cars, but car oil works fine. Normal 1W-40 would probably work the best. You would hardly ever

Twin tank air compressor does not pressurize past 65 to 80 psi. My framing air compressor will not shut off as it never reaches 125 psi. It only will pressurize to some where between 65 and 80 psi. ...

twin head motor with belt system to motor. Between the cylinder heads there is a little release valve. When the compressor is running (which it runs fine, charges the air tank and shuts off) but while

...Twin V Portable compressor just under 10 years old. Works great except sometime it causes the breaker to break and when I turn it back on the motor hums but not turning. I wait a while reset breaker, ...