Question about Binks Air Tools & Compressors
Air is coming out of the nozzle but the paint is not coming out. I have an air compressor with spray gun with container connected to the bottom of the gun. I turn compressor on and put it on at 40 psi
Question about Wagner Spray Tech Air Tools & Compressors
...making noise. nozzle head might be shut try turning it to open, you should here air coming out if air comes out but no paint comes out then paint is to thick and might need thinning, hope it
paint gun splatters paint on car when the gun was new it worked fine tried to paint my hood and paint comes out rough and looks as if it were splattered on rather then sprayed The needle valve in the ...
...air comes through strong and constant, fill the paint hopper with water and spray until empty if the water comes through constant, add half of the hopper with paint thinned with penetrol or floetrol ...
iwata airbrush gun air comes out the noxxle but when the paint cup attached the paint cup bubbles over. What's wrong wat kind of paint do ypu use?
...air is actually moving faster than the paint can drop into the mixture chamber if it is a gravity feed gun. If it is a suction feed then the air is moving too fast across the nozzle to pick up the ...
...air coming out of the gun without any paint/material. i can feel the material inside the canister bubbling but nothing is happening Check that valve inside the canister that let the air in and make ...
Question about Campbell Hausfeld Air Tools & Compressors
...no air coming out of the gun? If so you may have paint that has worked back into the air passages that needs cleaning out. If there is air coming out then it sounds like you have blocked
...air cap off make sure u can see all the holes thru the lights. take the nozzle and the cup off. see if there's any build-up inside that might possibly block the paint coming out. over all, clean ...
...paint not coming out. Not drawing paint out? did the canister tube fall out? dump the paint out into a saveable container and put straight (enamel reducer) in it and try to clean/clear the ...
1 questions posted
Usually answered in minutes!
317 Questions
162 Questions
122 Questions