CLEANING SANDER BUSHINGS IHAVE A BOSCH SANDER. IT ISN'T RUNNING AS WELL AS IT USED TO AND SOMEONE SUGGESTED CLEANING THE BUSHINGS. I'VE TAKEN APART THE SANDER AND FOUND THEM. THEY DON'T LOOK DIRTY. ...
...pad and does not allow the sanding discs to adhere properly. If you have a velcro type system, clean the hooks on the sander's backing bad by soaking the pad's face in a plate of paint thinner ...
Question about Bosch Tools & Hardware - Others
My Skil sander paper just won't stick anymore and I'm about to... The Velcro won't hold the sandpaper anymore help before I throw this **** off the roof Clean the Pad.
...inside as i'm replacing the broken base plate so will take it apart and give it a good clean, what sort of grease do I need, where should I apply it and should areas be avoided? There
Question about Tools & Hardware - Others
...sanders , you just take the original velcro off and make sure that the base is very very clean, use turps and metho to clean it with then buy some velcro from a good hardware supplier and really good ...
belt sander 3x24 Porter Cable the front roller gets gummed up with dust and very hard to clean. I use a dremmel to clean it but the aluminum on the front roller is being damaged. any tip on how to ...
...Any suggestions. check the comutator (where the brushes contact on the shaft) and make sure it is clean and not ...
should I do some sort of cleaning maintenance? I've been doing a lot of sanding lately. Either vacuum or blow up the sander with compressed air
Burt out sander. My sander overheated and stopped working. I cleaned it up and found it to be clogged with sawdust which led to overheating the motor. When this happens what generally needs ...
Question about Sander Tools & Hardware - Others
...it be fixed There is a ball bearing bearing on position 29 that is dirty replace it or remove and clean it open the sealings with a very little thin screwdriver solvent it out and re grease it and ...
4 questions posted
Usually answered in minutes!
37 Questions
17 Questions
18 Questions
1 Questions