Question about Porter Cable Tools & Hardware - Others
...backing pad does not last very long on these hook and loop designed sanders, and the pad should be replaced when the edges of the pad look worn. If the edges are okay try taking a toothbrush and
Question about Makita Tools & Hardware - Others
makita random orbit 5". The pad flew apart. Is it replaceable ? I don't see a bolt or screw holding it on. Usually there are 3 screws holding the plate to the eccentric assembly. The pad is formed to ...
Question about Dewalt Tools & Hardware - Others
...spring side of the disc toward the sander. e. Align the notches (H) on the CFS disc with the seams in the sander body. f. Replace the pad and the three screws. Be careful not to over-tighten
Question about Black & Decker Tools & Hardware - Others
...some way to get ahold of the old pads? Thanks, BB BB Is pad felt like? Try mcMaster-Carr for new replacement material and glue in
pad I have had to replace the sanding pad on the Makita BO 5010 5' random orbital sander twice since I purchased the tool. The problem is is that the sanding disk does not stay attached to the pad. My
7336 orbital sander how to replace sanding pad If you are talking about the actual sanding pad itself it should just pull of .If you are talking about the backing pad it should un screw
...I have had to replace the "pad" and now when I start the sander the screws (3) that hold the pad on tighten to the point the sander will not rotate. Any ideas? Use some loctite thread locker on
...pad and replace with new one. this action will separate pad from randomiser, if you need to remove randomiser as well, you will need spanner of appriopriate size or adjustable. you have manual ...
Question about Bosch Tools & Hardware - Others
...replace the backing pad on the sander. Over time the velcro (hook & Loop) on the backing pad will loose its stick. A Bosch service cneter can supply you with a new one, just let them know which model ...
22 questions posted
Usually answered in minutes!
123 Questions
62 Questions
28 Questions