Bosch 1274DVS 3" x 21" Belt Sander "dust bag air" Questions

...dust bag but the wood dust doesn't go in the bag. it used to. I have taped up some weak parts of the bag but I am not sure what the problem is . The fan works because I can feel the air flow out the ...

...dust bag anymore but flying all around. Is there an easy way to fix this or do I have to bring it to a repair shop? if you have compressed air remove the dust bag and blow thru every port and opening ...

...dust bag and unplug sander for now. Everywhere you see an access hole (fan area, dust port, back of sander blow thru the tool to remove lodged dust that clogged the system, Also look for broken belt ...

dust bag won't collect my belt runs great but it will not collect any dust in to the bag. Try blowing through the little **** that collects sawdust (inside back by belt) with a compressed air nozzle, ...

...no longer blow into dust collection bag. I suspect that there is a clog somewhere. are you putting holes in the papper with the guide? there has to be holes in the paper for the dust collection to ...

...dust at all, just spews it out all over the place, what could be wrong with it? I have a sander similar to this one. \Have the same problem from time to time. Usual problems are 1- the feed hole that ...

...dust collection bag not collecting the dust. Shooting dust out the front. What can be done to remedy this? the tool needs cleaned thoroughly. there might be a section of a belt that has jammed the ...

...dust anymore. I blew it out very well with my air nozzel and it did not help. It could have a piece of sanding belt in the passageway. What I have done is get a shop vac and VERY carefully run the ...

...bag. I've completely blown my sander with air and tried to unclog anything without taking the sander apart, but still all sawdust stays on the belt and not going up the "flu". Help The dust ...

intermintly will not come on checked switch, cord Take the brushes out, inspect them, and blow out the whole tool with compressed air.