Makita 9924DB Electric Sanders & Polishers "sander turn" Questions

belt sander adjustment bought used sander; went to use it and belt slides off sideways, tried to tighten ;but belt still slides off to the side There should be a knob on the front of the sander which ...

...sander and mine is doing the same thing. I replaced the  motor start capacitor and it did not fix it. If you turn the switch on and give the belt a big push does it start?? Watch your hand does ...

...highest setting and adjusts down from there. Where should the platter be at it's highest setting? I have a delta sander sa180 that won't turn when the switch is turn on. The motor hums but won't

...to work piece how do I stop this happening? There is a belt adjustment know on the side of the sander. Turn the adjustment know back and forth while the sander is running until it centers

...sander would be turned on and would not operate until I turn upside down and it would work. This is great if you are sanding upside down but this is just a sign that you are on borrowed time as this ...

SANDER RPM IS LOW , EVEN AFTER MAX AIR SUPPLY Turn dial on side,or on bottom of sander should change rpm.

sander, but every time i turn it on for use the belt works its way off... i bought this sander second hand at a boot sale so im thinking is there supposed to be an outside guide to keep the belt on no

...sander would be turned on and would not operate until I turn upside down and it would work. This is great if you are sanding upside down but this is just a sign that you are on borrowed time as this ...

...turn the sander back on and it would not turn on. a lot of times sawdust gets into the switch contacts and won't allow the tool to operate. I would try turning the switch on/off several times and ...

...sander stalling out when I only turn the crank 1/4 turn? A quarter turn is too much. You should only turn the wheel a maximum of 1/16 turn. Sanding should be done with just the sand (not the paper) ...