...generator to shut down 10 seconds after starting? Also how can this be corrected? The monitoring system of our Kohler propane generator has sent a "UU" message. What does this mean as it causes the ...
Question about Kohler Electrical Supplies
...shuts down. Why does my Kohler 7.3 generator start and runs great for about 5 min. then shuts downRestarts fine but shuts down seconds later. Upon removing rad cap, fluid is seen moving upon warm up. ...
Question about Kohler Electrical Supplies
Generator starts then shuts off in 8 to 10 seconds it shuts down Model # 11 rmy Check oil, and sensor, rotor rings, and brushes, then stator rotor for shorts
Question about Briggs & Stratton Electrical Supplies
...down" switch as opposed to carburetor oriented (it's natural gas). I don't recall, does your generator have oil monitoring, did you say you checked the oil. If it's a protection shutdown there may ...
Question about Generac Electrical Supplies
...know why generac generator won't keep running? It shuts down after about about 10 seconds. everything is in good working order: battery, filter, oil, tank is full with propane, etc. Which model is
Question about Guardian Electrical Supplies
...shuts off after running perfect for a feww minutes It is very likely you are having a problem with the low oil pressure switch or the high temperature switch. Both of these are connected to the No.85 ...
...Generator EU6500is, starts, runs for about 5 to 6 seconds, overload light comes on, then it shuts itself down. I pressed the i button for 7 seconds and get an "E-22" fault code. I have no ...
Question about Briggs & Stratton Electrical Supplies
Briggs/Stratton 7K propane gen starts runs 10 seconds shuts down Sounds like an oil pressure sensor issue. Be sure you have adequate oil volume and that the sensor line is connected.
Question about Briggs & Stratton Electrical Supplies
...starts runs for 10 seconds then shuts down. does this 3 times Sounds like the oil pressure sensor is not detecting proper pressure. Be sure you have adequate oil and that the sensor line is
Question about Kohler Electrical Supplies
...generator will start and then immediately shut down with no fault codes. When I flip the control in the unit Unit runs fine during it's weekly tests. Checked and oil is full, I have an OEM ...
3 questions posted
Usually answered in minutes!
4 Questions