Pride Go-Go Ultra X 3-Wheel Travel Scooter "wig wag mobility" Questions

...wig-wag (throttle) is in neutral when it first turns on. SOLUTION: Put the scooter up on blocks so the drive wheels are off the ground. With the SPEED KNOB turned fully clockwise, adjust the wig-wag ...

...wig wag pulled but wont move It could be the Wig-Wag needs replacing. But are there any fault bleeps or flashing lights. If so count how many and check in the trouble shooting guide of your user ...

...(wig-wag) have you had some speed issues with the scooter before this happened, if so the wig-wag needs replacing. Make sure it is in the centre position at rest and switch the scooter on

...Wig Wag, Click click No Motor OR scooter Jumps Violently Hi Peter, as a matter of interest check the brush holders, i seen a hugh number of those scooter lose the carbon part of the brush holder on ...

...wig-wag (the part you push to make the scooter go) and the rest of the electronics. It could be as simple as a loose wire or the whole wig-wag might need replacing. I'd recommend you take the scooter ...

...Wig Wag Assembly. (reverse the wig-wag function) simply de-solder the 2 outer wires & swap their position & re-solder.I would seek a price for doing the job from an approved scooter ...

...It could be the wig-wag at fault and need replacing. A loose or bad connection on batteries or drive system. Speed pot worn. Are the batteries old? May need load testing. replace both 35 amp ...

...charges, works perfectly. All electrics do not work. Please be more specific. Any flash or beep codes? Make\Model\Year of scooter? Is wig-wag pot {potentiometer} within tolerance? [5,000 ohms +/-

...is a bleep noise coming from the back, can you help please Sounds like the wig-wag is at fault. That's the lever you push to go forwards or backwards. if the lever is very loose, it needs

has NO reverse but goes great in forward help This sounds like the Wig-Wag could be at fault or the wiring to the controller.