Pride Mobility Products Legend XL 4-Wheel Scooter w/55 AH Batteries & Charger/Flat-Free 13" Tires/22" Seat - Color Candy Apple Red -Brown Fabric Seat Coverings "battery charger troubleshooting" Questions

...charger powers on, but will not run the charge to the battery unit. I have presed the reset button on the battery (pack), removed and reinserted the fuses on both the battery pack and engine ...

...battery charger to see if it is functioning properly P/N A24040-IL-EMI MODEL AE244000 If I take it out of the scooter to troubleshoot it, do I have to short pins together, etc. to get an output from ...

battery charger indicating that batteries are fully charged, but battery meter on the scooter shows no power at all. also the lights, indicaters etc arent working, im presuming that is resulting from ...

...charger. When the battery is full, it will stop charging and check about oncew a miute to maintain the charge. Now, when you plug in the key (looks like an audio headset jack) does the battery meter ...

Hi. Our pride Ranger PMV is not charging correctly. The Charger lights stay on green and never go to red to state charging. The batteries are quite flat now. Batteries were new last year. We have ...

...battery charger! Car batteries are not sealed air-tight, like scooter and powerchair batteries. Charging generates hydrogen-sulfide gas which is released from non-sealed batteries. Sealed batteries, ...

CHARGER GREEN LIGHT FLASHES ALWAYS EVEN WHEN NOT PLUGGED INTO BATTERIE ALSO ONLY LASTS ABOUT 1 HR ON SCOOTER GOES FROM GREEN TO RED IN NO TIME CAN YOU BUY A DIFFERANT BATTERIE FOR THE TRAVEL SCOOT ...

...battery voltage is too high to operate the scooter, or the charger is still connected to charger port. Unplug charger and/or turn key off, then back on again. ! ! ! ! (4) Current limit time out. Turn ...

battery charger and turn on switch the indicator lights flash. When not plugged into battery charger will not turn on, horn not working. Tried to take off seat to check battery leads..lever not moving

charger If it is an off -board then when you plug it in you should have two lights the red power light and a yellow light(turns green when unit is fully charged) Unless ther was some sort of damage to