Tyre pressure What pressure? You should find it marked on the wheel and or around a tyre valve. If you have standard tyres and tubes check your not very useful Pride instruction book.
Question about Health & Beauty
...should the tyre pressures be on the kymco maxer EQ40DA (uk) mobility scooter?? They are are Pneumatic with gel. Several of them look flattish. Any help appreciated please. KYMCO Maxi XLS Owner ...
...machine and they said that the tyre pressure was low. Hi there the cracking in the back end of your scooter is usual caused by dry axles. Take wheels off and apply a little grease to your ...
...tyre to the recommended pressure in stages gently bounce the wheel once or twice to help the tyre to seat properly. Inflate to just above the recommended pressure and release surplus air. Offer the ...
Question about Electric Mobility Health & Beauty
...tyre type or pressure. Before attempting to correct this problem, its probably a good idea just to lift the front of the scooter off the ground and turn the steering to be sure that the bearings are ...
Question about Health & Beauty
...pressure into a flat wheel and air wont go in./inflate. Get a piece of nylon rope cut it slightly larger than the tyre,then tie a Knot joining the rope into a loop. Put around the tyre and use a bar ...
Tyre pressures for Batricar with Alpha Cabin Thanks. I would say about 25 to 30 psi, depending on weight just make sure the tires don't go too hard, Regards GeWiz
what tyre pressure tyre pressure is the pressure which is inside the tyre
Question about Pride Health & Beauty
I have a pride victory e3 wheel scooter. It suddenly became hard to turn to the right Hi check tyre pressure should b 30 to 35 psi... Cheers
72 questions posted
Usually answered in minutes!
140 Questions
116 Questions
82 Questions
61 Questions
58 Questions