Coleman Powermate Powermate 5000W Generator "gas cap vent" Questions

Ad

Question about Yamaha Electrical Supplies

1 Answer

...not running and/or after it has ran, you can remove gas cap and hear pressure release! Any answers would be appreciated!, Thanx A Million Check that the vent hole in the cap isn't obstructed.

Ad

Question about Coleman Electrical Supplies

1 Answer

...with gas cap loose to allow more air into the tank. If cap is fault try to clean cap vent ports with carb cleaner or just replace the cap. If not fuel lock, remove wire from oil sensor and test

Ad

Question about Coleman Electrical Supplies

1 Answer

...gas cap when running. I am having the same problem with my 1850 as well. I borrowed the cap off my lawn mower but the vibration was still pushing gas out of the top of it as well. I cut out a thick ...

Question about Honda Electrical Supplies

1 Answer

...you change any parts make sure that your cap is venting properly. Many California gas caps (tall chrome gas cap) may cause fuel lock. Also check that muffler is not restricted with carbon. Good ...

Question about Coleman Electrical Supplies

2 Answers

...gas tank that needs to be fixed? Under the fuel tank you should have a fuel shut off with filter, check and clean the filter. try running it with the fuel cap loose too...tecumseh has a lousy vent ...

Question about Watts Electrical Supplies

3 Answers

gas cap. There is a vent to allow air into the fuel tank as the fuel is drawn out. If this vent becomes clogged, a vacuum can be formed in the tank. This can prevent gas from flowing to the carburetor

Question about Makita Electrical Supplies

1 Answer

...gas tank cap vent is clogged,remove the cap and check the gasket in it.Check the flyweel key(not to be sheared) and the condenser( not to be defective).The ignition points(not to be burned).Check the ...

Question about Electrical Supplies

2 Answers

...gas cap off? Champion 3500, Model 46598 gas cap is stuck. Tried turning left with pressure and just clicks. try applying the pressure with water pump pliers if you have the room to work with them ...

Question about Coleman Electrical Supplies

1 Answer

...gas Hi,  a possible cause of fuel starvation, often overlooked, is the vent hole in the filler cap, i.e. try running with the cap removed, if this works , then the tank is not venting ...

...rpm , now running rough at 500-600rpms off and on , warm , or cold code said iavc p1459 i think and said check gas cap what? LEAK IN VENT SYSTEM ----A Loose Or Non Sealing Gas Cap Can Cause

Not finding what you are looking for?
Coleman Powermate Powermate 5000W Generator Logo

849 questions posted

Ask a Question

Usually answered in minutes!

Top Coleman Electrical Supplies Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Coleman Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...