Northstar Generator 20 Hp, 13,000 Watt, Gasoline "carb porter cable" Questions

...porter cable generator will start but it will not stay running. Hi, If this generator has been stored for any length of time with fuel in the carb you probably have a plugged main jet in the carb. As ...

...carb and getting in oil. What can I do?? 6500 watt 13hp porter cable Overhaul the carb, make sure the float hasn't sunk and see that the brass valve attached to it is sealing completely in it's

...porter cable portable generator model h1000.it run for 2 min then shuts down.have replaced fuel pump and cleaned carb.at idle it runs longer but still cuts off. cleaned carb,replaced fuel pump and ...

...porter cable h450is generator won't start changed spark plug, cleaned fuel valves, can't get carburetor off though it will start up for about 1 second then die If it starts initially, then it has ...

been stiiting for 6 months wont start? Start by draining the fuel and cleaning the carb. Modern gas goes stale pretty fast and any gas over 90 days old is risky if you don't add a fuel stabilizer.

...leaks out air 19e412-0134-01 won't start. gas leaks out air filter The float is stuck on the carb flooding the engine and leaking gas out of air filter. Remove the float bowl after the gas is ...

...porter cable 10,000 watt generator, newish has good gas in bowl but wont go through carb, why ? fuel pump works well.... plugs are dry.. runs for 5sec with quick shot start fliud. then dies.. Hi, You ...

gas runs out of carburetor when not runing stuck float, the float in the bottom of the carb is not droping so it does not shut off the gas. Drop the bowl and clean all the part.s watch for the little ...

Can I spray carburator cleaner in the mouth of the carburator The honda motor gx200 stalls when the choke is completely open yes you can be careful and be sure the engine is not hot BUT i suspect the ...