Viking Air Tools Dual Piston Straight Line Sander "sander plate" Questions

...plate sander vs drum for a floor that only needs plate sander vs drum for a floor that only needs light sanding is this the best way to go with plate sander? my last job the drum left light stop and ...

...Sander is not "collecting" dust even with a new sanding bag, what could be the problem? Are you using the punch plate to put holes in the sand paper after you put on a new sheet? If you are it could ...

plate is jammed or something broke. What do you think? This sander is probably 30 years old, very heavy duty. check the bearing in the platen, it is probably seized up. you can go to Milwaukeetool.com

I am replacing the head on my porter cable drywall sander. I need to know if the treads on the bolt holding the sanding disc backer plate is regular or reverse thread. Left Hand.

...sander plate screws being carefull not to strip them. Look at the plastic ******** extentions attached/flooting to the houseing and look for broken or bent arms on them ,replace with new ones, this ...

...plate is not worn excessively. Then I would turn the front roller without the belt on it to make sure not out of round and moving smoothly. Lastly if you are using directional belts make sure ...

makita random orbit 5". The pad flew apart. Is it replaceable ? I don't see a bolt or screw holding it on. Usually there are 3 screws holding the plate to the eccentric assembly. The pad is formed to ...

...sander. The rear drum(28-95-0055)seems to be worn and doesn't drive the belt well anymore. Also, the base plate (28-72-0030)is worn away and needs to be replaced. I have looked everywhere online that ...

...sander, I want to grease inside as i'm replacing the broken base plate so will take it apart and give it a good clean, what sort of grease do I need, where should I apply it and should areas ...