Optoma HD65 DLP Projector "socket" Questions

...the unit is switched off, and is unpluged from the AC mains. With a DVM it is possible to check the socket contacts. The unit would have to be unassembled to gain access to the lead wires that go to ...

I have a Panasonic PT-DW5100U projector and when i plug it into the power socket the lamp1, lamp2 indication lights are on and the power light is in red. when i press the power button the power light ...

...changing the cable. The problem may not necessarily be from the cable. It has to either be from the socket you plug it or the internal Power IC inside the projector. If your socket is working fine ...

...recommendations? I am having a difficult time getting an answer from Viewsonic. It sounds like the socket that the bulb goes into has an intermittant connection problem, or where the wires attach ...

...the white is white when menu is pressed if it is then it is the lead, it possible could be the VGA socket but i have never seen a faulty socket so unlikely. Marc ...

...EP9012, and I'm having problems with the power. The kettle lead has to be jiggled in the socket on the back of the projector. This takes a while, but eventually you hear a small pop and

...the lamp hours to zero. To reset the lamp timer do as follows. Plug the power cord into the AC socket of the projector. Switch ON the power of the socket. (not projector) While pressing ...

My projector will display an image from my PC, but when connected to a video scource via the Phono socket or the SVideo socket, nothing, It just stays on the Infocus welcome screen. The menu ...

...to have the projector serviced. I think I had a similar problem- are you connecting to the right socket.? The VGA on the 3100MP socket is `VGA out` you might need to connect to the `DVI monitor

how to connect tv to projector connect the TV monitor composite output (yellow rca socket) to the yellow video2 socket on the projector. connect the TV red and white audio outputs to a stereo to mono ...