...compressor is hot and relay clicking the compressor has failed internally.because if the relay was clicking but the compressor was not hot there was a chance only the relay was bad and not allowing ...
...Freezer appears that the compressor is getting hot enough to burn ( serious discoloration) the linoleum below the freezer. The compressor is hot to the touch. Freezer is working just fine. What to
...compressor running hot if its not hot and the fan by the compressor is running the problem is that the compressor is not starting check the compressor you might need a new start relay mounted on the ...
...relay is ok then the compressor is bad. another thing to look at is the hot water thermostat. it may no longer functioning as to the cause of the bottle to be extremely hot. tnx 4 using fixya, ...
...compressor ?) is very hot to touch (it's still warm now having turned the freezer off over 2 hours ago). there is no clicking noise coming from the compressor. is this a compressor or a thermostat ...
...compressor is really hot, I am sorry but your compressor is bad. Replace the overload/relay which is plugged onto the side of the compressor . Easily replaceable with only 2 or 3 wires . Take your ...
...COMPRESSOR GETS HOT AND STAYS HOT NOT NORMAL, AND IS USUALLY THE RESULT OF OVERWORKING OR STRESSING THE COMPRESSOR? DUES TO EITHER LEAVING THE DOOR OPEN TO LONG TO MANY TIMES. A BAD DOOR SEAL, BAD ...
Question about Roper Refrigerators
hot compressor are: It is just hot and is not a problem.Lack of ventilation to compressor.System is short of refrigerant which prevents the return refrigerant from the cooler being cold enough to cool
hot if the compressor is?? Correct, condenser coils remove heat from the freezer compartment, thusly they will be hot. Sounds like the compressor is failing and that is probably giving off a squealing
Question about Kenmore Refrigerators
...compressor is hot it means (a) low charge (b) locked rotor and in any case it can be fixed " low charge " is a non-good tech answer . No such thing . Replace the overload/relay on the compressor . It ...
1 questions posted
Usually answered in minutes!
101 Questions
46 Questions
20 Questions
27 Questions
30 Questions