Xerox Phaser 8560DN Printer "remove tray copier" Questions

...barely break the sensor that tells the machine the tray is in the proper position. Getting the ink removed from behind the tray resolved that

...tray sensor. You have to remove one screw from the back top of the cover, then the top front of the cover. Lift up and out on the cover to release the tabs and pop the cover off. Then have someone ...

...Remove the tray, first look for a piece of paper that has come out of the tray inside the tray area. Make sure the rolllers are snapped into place. The easiest way to verify that is to remove another ...

...remove waste tray. Is there a any other Can not remove waste tray. Is there a any other access path for this area? The waist tray is parallel to the maintenance (cleaning) tray. If you miss the 30 ...

...Remove Tray 2 completely. 2. Clear the jammed paper from the printer's intake slot. 3. Re-insert Tray 2. 4. Open front door A. 5. Remove jammed paper if present. 6. Close front door A chr15g I was ...

...remove the tray On the Brother DPC130C Take off the back cover, sort of triangular piece of plastic. Take power cable out, turn the device on its side and look at the back in the centre there is a ...

unload output tray Apparently the machine is telling you to remove the copies made from the output tray, probably it is getting heavy.

...tray was 'stuck'. To remove, I first removed the maint kit and then with a flashlight shined inside, saw there was a lever on the right side which, when I moved it, released the waste tray. Voila - ...

Remove media from output tray I have a Phaser 780 that has not been on for several months due to a room change. Now when I turn it on I get the message to "empty the output tray". When I press the ...

tray themselves, remove the paper and slide them in and out all the way, put the trays back in the machine and put the paper back in the tray moving the slides right up against the paper and close the