Linksys WRT160N Wireless Router  "link lan lights solid" Questions

Link Dr-825. As far as I can see I've set it up correctly, but the Internet light is a solid yellow, so no Internet access. What do I do? I don't know anything about stuff like this, so really

...LAN lights are solid when you are connected, and the connection is idle. The lights blink when traffic is present. The lights are off when there is no connection. if they stay on they are not ...

...Press and hold it for 5 secs then wait until the LAN light turns solid and try to access again the router by it's default IP address. You can get the IP by running ipconfig on the DOS command

...to control panel > Network Settings > right click Your Network (LAN) adapter, properties, click configure, advanced tab and make sure your link speed is set to "auto negotiate" or "auto

...LAN)-->Dlink(WAN) ]. Once you do this connection, better to do power cycle ( unplug the pwr to the dlink first, then, disconnect the pwr to action tech - wait 1min and plug the pwr to modem, wait for ...

Lan cable into the router I get no up link. My friend ask me to take a look at the router because she lost connection about a week ago You said there is a diag light lit up on the router. In that case

...LAN Settings button. Make sure nothing is checked. Click OK. Step 7 Go to the Advanced tab and click the Restore Defaults button to restore these settings to their defaults. Click OK. Step 8 Close ...

...LAN ports (Ethernet ports) using a network cable. WAN port of the router should be connected to your modem. Verify physical connectivity by checking for solid link lights on the Ethernet ports of the ...

lights of your router is working the POWER should have a solid light, the STATUS, WAN, LAN 0r WLAN should be blinking... if right, but still doesn't connect.... What kind of connection do you have? is

...LAN Settings button. Nothing should be checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK out to the desktop and close any open ...