Question about Peavey Music
looking for a schmatic for the 410 tvx 4 ohm and the 410 tvx 8ohm cabinets looking for a schmatic for the 410 tvx 4 ohm and the 410 tvx 8ohm cabinets to see if i can convert the 410 4ohm to a 8 ohm ...
Question about Peavey Music
can i run a peavey 2600 with a 4 ohm load on one channel and an 8 ohm load on the other I would think you can if the amp is rated for 4 ohms but the 4 ohm might be loader then the 8 ohm because it ...
what ohm selection and which input do i use on peavey valveking head/ca that depends on your cabinet(s). if you have an 8 ohm cabinet you want to use your 8 ohm out. if its a 16 ohm cabinet you want ...
...30 II amp and have a setting question. I made a 2-12 cabinet to hook to this amp. Each speaker is 4 ohms. They are wired to their own output jack. My amp has 2 outputs for speakers and a 4-8-16 ohm ...
...Passpost 500 Amp system We want to add extra speakers to this system. The original speakers are 8 OHM each.The additional speakers would also be 8 OHM and wired in parallel so the system would see
Question about Music
I have a Crate V16 -15 watt Amp w/12"-16 ohm speaker. Can I use a 8ohm speaker instead ?? Thanks Can I use a 8 Ohm speaker in this Amp?? According to the manual, it needs a 16 ohm minimum load, so no,
I Have A Peavey Valveking head and cab. I was wondering what inputs for the OHMS to put it on if i were to be playing in a band. 4, 8, or 16? and what input do i plug the speaker cable into on the cab
Question about Fender Music
i have a fender frontman 65r with a 8ohm speaker can i add another 8ohm speaker to this http://cie-wc.edu/Series_Parallel_9_14.pdf Not recommended. you could add 3 more 8 ohm speakers in series / ...
...speakers. Should we be running series or parallel? Peavey XR 8600?? Well it's 600w per ch. at 4 ohms/per side. So, whichever mode you use (Main, or Main/Monitor) you are best to have a 4 ohm
Question about Marshall Amplification Music
can i connect 2 (2x12) cabs rated @ 4ohms each to my avt50 head? 2 outputs on my marshall avt50 head.....total impeadance is 4 ohms. can i connect 2 seperate 2x12 cabs rated @ 4 ohms each? i want to ...
57 questions posted
Usually answered in minutes!
155 Questions
25 Questions
18 Questions
12 Questions