Question about Garden
...brand new can u help me please cheers chris you shouldn't have a problem with chips stopping the nose sprocket. make sure the saw is oiling well and that if the nose is grease-able it is greased. ...
after tightening the chain up on the bar it still loosens up why Keep the nose up!!! Chain adjustment Make sure the chain brake is off (gloves will protest your fingers). If necessary, loosen the bar ...
mcculloch 110 - loose chain - how do you adjust (tighten) the chain? Look at the saw body from the nose of the bar, Just to the left of the bar a slotted screw head should be visible (on clutch cover)
...One that has been in service for a while the stretch should be adjusted out. Not holding the nose of the bar up as you tighten the bar nuts is the usual cause of this malady. Chain Adjustment ...
...use a vice, you just have to be careful not to "squeeze" too tight. I get a good pair of needle nose pliers and "straddle" the prongs on the brake wheel. Then you can take a pair of regular
loose to me, but I think it is as tight as I can get it. It is a remington 14" chainsaw. If a solid nose bar it needs to be slightly more slack. Judging by the number of requests for adjustment repair
...it over the sprocket first, then work your way right putting it into the bar grove as you go, the nose last. Grasp and pull the bar right the chain should rise into grove, you may need to help. ...
...finger tight will do. Ease the tension until the chain is obviously loose. Using one hand, hold the nose of the bar up. Now, while holding the nose up, adjust the tension so that the chain just ...
...my paslode framing nailer pushed down on piston as it says in manuel put gun back together and nose wont push down to let it fire when gun is apart nose pushes when it is together it wont sounds ...
368 questions posted
Usually answered in minutes!
155 Questions
148 Questions
117 Questions